0.3 mm pitch CSP in development!

Call now. Let us capture your 0.3 mm-pitch input!


Tel: 1-508-236-1868





Site Updated February 16, 2018

* * * Sensata > Products > Burn-in Sockets > BGA > CSP >

0.75 mm Pitch CSP Burn-in Test Sockets

Mechanical Characteristics
Contact system
Normally closed
Package insertion force
Contact force
Typical: Approximately 15g/pin
Range: 10–20g/pin
Minimum: 10,000 cycles
Temperature range
-55°C to 150°C
Contact point
Side of solder ball
Maximum IC offset
During load: ±1.0 mm in X or Y axis
Actuation force
Typical: 1.0kg

Electrical Characteristics
Current rating
1 amp per pin
Insulation resistance
1000 mohms at 500V DC
Dielectric voltage
Withstands 700V AC for 1 minute
Contact resistance at 10mA
Initial: 50 mohm maximum initial
After 10K cycles: 1 ohm maximum
6nH at 50 MHz, approximately

Product Accommodations
Maximum: 14x14 array
IC size
Maximum: 16x16mm
* * *
24/7 Worldwide Support
CSP Leaders
Interconnect Since 1970

BGA IC Test and Burn-In Sockets

Request more info.

Contact a product specialist.

Chipscale Ad See our ad in Chipscale Review magazine »

The World Depends on Sensors and Controls